COMSOL's Webshop
Computer Solutions Ltd

Celebrating 38 years
supplying all your CAN and Embedded Development Tool needs



Exchange rate fluctuations may force us to increase these prices. If they do then we will contact you for permission before charging your credit card.

 

 

Exchange Converter
 Up Catalog Terms & Conds Search View Basket Checkout  Contact Us   

*** WHAT'S NEW *** V3.1.2.5
---- Shop Contents ---
CAN & LIN Products
Programming Flash memory and Debugging CPUs using BDM/JTAG Tools
C Compilers & Assemblers
USB Protocol Analysers
ROM Emulators
--------------------------------- Suppliers A to Z


Programming Flash memory and Debugging CPUs using BDM/JTAG Tools > PEmicro low cost ARM Development Tools
PEmicro Products support a wide range of ARM Development options

Software support is available for.....  

Flash Programming  

--  The Cyclone Universal, Cyclone ARM and Cyclone Max include Flash Programming Software for all the CPUs they supports

--  ARM Flash Programming software package will work with either the USB Multilink Universal or, for faster loading, the USB Multilink Universal FX interfaces

Keil  Vision,  IAR  Embedded  Workbench, NXP/Freescale CodeWarrior 10.6; Cosmic IDE & ZAP 

--   Built in support for  Cyclone Universal, Cyclone ARM, Cyclone Max, Multilink Universal and Multilink Universal FX for both Debugging and Programming

KDS  Kinetis Design Studio,   Atollic TrueSTUDIO

 --   Use the free PEmicro GDB Kinetis server to support  Cyclone Universal, Cyclone ARM, Cyclone Max, USB Multilink Universal and USB Multilink Universal FX cables for both Debugging and Programming

OpenSDA and  OSJTAG  

--  can also be configured to use a Free GDB Server which can be upgraded to support the PEmicro interfaces once development has moved on from the EVB stage





Cyclone for ARM® devices - Cortex Programmer Cyclone for ARM devices - Cortex Programmer
Use the Cyclone as a Serial, USB or Ethernet interface between a PC and any ARM M series chips from:-
ATMEL SAMxxx
Infineon XMC4xxx
Freescale Kinetis and S32
Silicon Labs EFM32, SiM3
STMicroelectronics STM32
Texas Instruments/Stellaris TI-LM3/4
NXP LPCs
Cypress' PSoC® 4
Toshiba's TX00/TX03/TX04 processors
Maxim MAX716xx

Also serial SPIs

Software to program on and off-chip flash is included.

The unit can be used as a standalone programmer loaded by a PC, taken to production, then operated via the LCD or a batch program.


For more technical information.


Price:    495.00 / 544.50 Excluding  VAT at 20%

Quantity:  

Cyclone for ARM FX Cyclone for ARM  FX
This is the top of the line release of the Cyclone ARM. It provides all the features of the Cyclone ARM with the following additions....

USB 2.0 link now supports "High-speed" protocol (up to 480Mb/sec to the PC)
1 Gbyte internal memory, no practical limit to # of images held
SDHC Port for even more space
For all ARM CPUs a variant of the communication link to the target is provided that increases the download speed to up to 25Mb/sec
Additional Security and logging features to support Production programming



Price:    835.00 / 918.50 Excluding  VAT at 20%

Quantity:  

Cyclone Universal Cyclone Universal
Use this latest release of the Cyclone via a Serial, USB or Ethernet interface to program the flash on any of the following ....
Most ARM Cortex devices including Kinetis, NXP, Atmel, Cypress, Infineon, Maxim, Silicon Labs, STMicroelectronics, Texas Instruments, and Toshiba.
And the following Freescale families Qorivva MPC55xx/56xx/57xx, MPC5/8xx, ColdFireV1, 1+,2-4, HC(S)12(X,Z), HCS08, HC08, RS08, S32, DSC and MAC7xxx target system.
Software for programming on and off-chip flash for all families is included.
With suitable software it can also be used to debug these CPUs. Or it can be used as a standalone programmer loaded by a PC, taken to production, then operated via the large LCD or a batch program.
Includes all necessary cables for use with the above targets.


For more technical information.


Price:    650.00 / 715.00 Excluding  VAT at 20%

Quantity:  

Cyclone Universal FX Cyclone Universal FX
This is the top of the line release of the Cyclone Universal It provides all the features of the Universal with the following additions....

USB 2.0 link now supports "High-speed" protocol (up to 480Mb/sec to the PC)
1 Gbyte internal memory, no practical limit to # of images held
SDHC Port for even more space
For most modern CPUs a variant of the communication link to the target is provided that increases the download speed to up to 25Mb/sec
Additional Security and logging features to support Production programming


For more technical information.


Price:    995.00 / 1,094.50 Excluding  VAT at 20%

Quantity:  

Cyclone Max Cyclone Max
Use the Cyclone as a Serial, USB or Ethernet interface between a PC and an ARM Cortex M0-4such as Kinetis, ColdFireV2-4, PPC5xx/8xx, Qorivva (AKA Nexus)55xx/56xx/57xx, PX, DSC or MAC71xx target system. Software for programming on and off-chip flash for all families is included.
With suitable software it can also be used to debug these CPUs. Or it can be used as a standalone programmer loaded by a PC, taken to production, then operated via the LCD or a batch program.
Includes 10 and 20 pin mini cables for use with ARM targets.


For more technical information.


Price:    760.00 / 836.00 Excluding  VAT at 20%

Quantity:  

USB Multilink Universal FX Cable & ARM Flash Programming Software
Using the USB Universal FX cable to interface between a PC and an ARMs processor the windows software package will program either on chip or external flash memory or on chip EEPROM.
The FX Cable will program ARM approximately 7 times faster than the USB Multilink or Universal.

With other software the Universal-FX cable also works with the HC(R)S08, HC(RS)12(XZ), ColdFire V1-4, Qorivva 55xx/56xx/57xx (NEXUS), DSC, 683xx and 68HC16.

A single user licence is supplied.


For more technical information.


Price:    510.00 / 561.00 Excluding  VAT at 20%

Quantity:  

USB Multilink Universal Cable & ARM Flash Programming Software
Using the USB Universal cable to interface between a PC and an ARM processor the windows software package will program either on chip or external flash memory or on chip EEPROM.

With other software the Universal cable also works with the HC(R)S08, HC(S)12(XZ), ColdFire V1-4, Qorivva 55xx/56xx/57xx (NEXUS) and DSC.

The Universal FX+PROGACMP is also available which can program ARM chips at ~7 times faster than the USB Multilink Universal cable.

A single user licence is supplied.



For more technical information.


Price:    340.00 / 374.00 Excluding  VAT at 20%

Quantity:  

USB Multilink ARM Cable & ARM Flash Programming Software
Using the USB Multilink ARM cable to interface between a PC and an ARM processor the windows software package will program either on chip or external flash memory or on chip EEPROM.

The Universal FX+PROGACMP is also available which can program ARM chips at ~7 times faster than the USB Multilink ARM cable.

A single user licence is supplied.



For more technical information.


Price:    300.00 / 330.00 Excluding  VAT at 20%

Quantity:  
See below to purchase the individual components from the packages.

USB Multilink Universal Cable FX version USB Multilink Universal Cable  FX version
Use this High Speed Version of the Multilink Universal cable to interface between the USB port of a PC and a target processor. For the ARM, Qorivva, ColdFire V1-V4, DSC, and 683xx CPU families the FX is 4 to 10 * faster than the Universal Cable.

With suitable software this cable can be used for debugging or flash programming most popular ARM Cortex M0-4s and any of the following Freescale products Kinetis, HC(R)S08, HC(S)12(X), S12Z, 683xx, HC16, ColdFfire V1 thru 4, Qorivva 55xx/56xx/57xx (Nexus), and DSC microcontrollers .

These cables are normally used with licensable P&E software and each cable in use requires a separate software license. Software may not be reproduced and used with multiple cables.


For more technical information.


Price:    340.00 / 374.00 Excluding  VAT at 20%


Please advise which software this Cable will be used with (eg CodeWarrior, P&E)
Quantity:  

USB Multilink Universal Interface Cable USB Multilink Universal Interface Cable
Use this low cost Multilink Universal cable to interface between the USB port of a PC and the debug port of a target processor. With suitable software this cable can be used for debugging or flash programming most popular ARM Cortex M0-M4s and any of the following Freescale products Kinetis, HC(R)S08, HC(S)12(X), HC12Z, ColdFfire V1 thru 4, Qorivva 55xx/56xx/57xx (Nexus), PX, or DSC microcontrollers .

These cables are normally used with licensable PEmicro software and each cable in use requires a separate software license. Software may not be reproduced and used with multiple cables.


For more technical information.


Price:    170.00 / 187.00 Excluding  VAT at 20%


Please advise which software this Cable will be used with (eg Codewarrior, PEmicro)
Quantity:  

USB Multilink ARM Interface Cable USB Multilink  ARM Interface Cable
Use this lowest cost Multilink ARM cable to interface between the USB port of a PC and the debug port of an ARM Cortex processor. With suitable software this cable can be used for debugging or flash programming most ARM Cortex 0-4 devices including Kinetis, NXP, Atmel, Cypress, Infineon, Maxim, Silicon Labs, STMicroelectronics, Texas Instruments, and Toshiba.

These cables are normally used with licensable P&E software and each cable in use requires a separate software license. Software may not be reproduced and used with multiple cables.


For more technical information.


Price:    130.00 / 143.00 Excluding  VAT at 20%


Please advise which software this Cable will be used with (eg PEmicro or Atollic)
Quantity:  

ARM Flash Programming Software
Use a P&E cable to interface between a PC and a target processor, this windows software package will program either on chip or external flash memory or on chip EEPROM.

A single user licence is supplied and delivery is via the internet.

Will work with USB Multilink Universal or USB Multilink Universal FX cables (not included).


For more technical information.


Price:    170.00 / 187.00 Excluding  VAT at 20%

Quantity:  

ARM Library Interface Routine 5 Licences
A set of C library calls that provide an API for using the PEmicro Universal or Universal FX cable (not included). Ideal for those who need to write their own PC based test or diagnostics programs.
Windows and Linux x86 versions are available.

Delivery is via the internet.


For more technical information.


Price:    230.00 / 253.00 Excluding  VAT at 20%

Quantity:  

OS


ARM Library Interface Routine Unlimited Licences
A set of C library calls that provide an API for using the Universal or Universal FX cable (not included). Ideal for those who need to write their own PC based test or diagnostics programs.
Windows and Linux x86 versions are available.

Delivery is via the internet.


For more technical information.


Price:    540.00 / 594.00 Excluding  VAT at 20%

Quantity:  

OS


Programming Flash memory and Debugging CPUs using BDM/JTAG Tools > PEmicro low cost ARM Development Tools

HomeProductsSupported ChipsInformation ZoneContactSite Map
 
Computer Solutions Ltd
3b Claremont Road, West Byfleet, Surrey KT14 6DY, England
 
Telephone: +44 (0)1932 355630
Email: sales@computer-solutions.co.uk     Web: www.computer-solutions.co.uk
 
Copyright © 2017 Computer Solutions Ltd