COMSOL's Webshop
Computer Solutions Ltd

Celebrating 38 years
supplying all your CAN and Embedded Development Tool needs



Exchange rate fluctuations may force us to increase these prices. If they do then we will contact you for permission before charging your credit card.

 

 

Exchange Converter
 Up Catalog Terms & Conds Search View Basket Checkout  Contact Us   

*** WHAT'S NEW *** V3.1.2.7
---- Shop Contents ---
CAN & LIN Products
Programming Flash memory and Debugging CPUs using BDM/JTAG Tools
C Compilers & Assemblers
USB Protocol Analysers
ROM Emulators
--------------------------------- Suppliers A to Z


CAN & LIN Products > CAN Diagnostics, Routers, Gateways, Repeaters & Opto Link

Prices quoted are ex-VAT. Euro price is advisory only.
These items are normally dispatched 3-5 days ARO.


PCAN-Diag Hand held CAN Bus Diagnostic unit PCAN-Diag Hand held CAN Bus Diagnostic unit
PCAN-Diag 2 is a handheld diagnostics unit with a wide range of functions to allow investigation of the correct operation and performance of a CAN bus, such as detection of the CAN bit rate, bus load measurement, and termination measurement. As well as receiving CAN messages, it can transmit either individual test messages or entire sequences of them. In addition, the internal memory card allows tracing and playback of the CAN traffic.

The integrated two-channel oscilloscope enables visualization of CAN signals.

Normally supplied with High-speed CAN transceiver modules; Low-speed or Single-wire CAN are also available.

Part Number: IPEH-002069


For more technical information.


Price:    860.00 / 946.00 Excluding  VAT at 20%

Quantity:  

PCAN-Diag Hand held CAN FD Bus Diagnostic unit PCAN-Diag Hand held CAN FD Bus Diagnostic unit
PCAN-Diag FD is a handheld diagnostics unit with a wide range of functions to allow investigation of the correct operation and performance of both CAN 2.0 and CAN FD bus, such as detection of the CAN bit rate, bus load measurement, and termination measurement. As well as receiving CAN messages, it can transmit either individual test messages or entire sequences of them. In addition, the internal memory card allows tracing and playback of the CAN traffic.

The integrated two-channel oscilloscope enables visualization of CAN signals.

Normally supplied with High-speed CAN transceiver modules; Low-speed or Single-wire CAN are also available.

Part Number: IPEH-003069


For more technical information.


Price:    1,280.00 / 1,408.00 Excluding  VAT at 20%

Quantity:  

PCAN-Router Pro (4 channels) inc Windows based Configuraton Software PCAN-Router Pro (4 channels)  inc Windows based Configuraton Software
The PCAN-Router Pro allows the data traffic from up to four High-speed CAN busses to be connected together. The CAN data can be processed, manipulated, filtered all configured using Windows software which is included. There is a virtual fifth CAN channel which can log some or all of the data traffic to a Compact Flash card.

This product needs a peak interface in order to configure it.

High speed CAN trancievers are standard but opto-decoupled, Low-speed and Single wire CAN transceivers are also available on request and CAN termination is switchable.

As an alternative to the standard firmware which the PCAN-Router Pro is equipped with at delivery, custom firmware based on the ARM microcontroller NXP LPC2294 can be created and implemented. A library and the Yagarto GNU ARM toolchain (contains the GNU Compiler Collection GCC for C and C++) are included with some example configurations..


Part Number: IPEH-002212


For more technical information.


Price:    495.00 / 544.50 Excluding  VAT at 20%

Quantity:  

PCAN-Router with 2 D-Sub PCAN-Router with 2 D-Sub
The PCAN-Router is a module with two CAN channels, whose data traffic is processed by a programmable ARM microcontroller so that incoming CAN messages can be evaluated, converted, and filtered individually in order to transmit appropriately customized CAN messages to the other network.

An additional LIN channel for the PCAN-Router is also available on request.

You can load your own firmware to the module via CAN using the pre-installed boot loader. The PCAN-Router is shipped with demonstration firmware which performs one-to-one forwarding of the CAN messages between the two CAN channels at 500 kbit/s. The corresponding source code is supplied on the CD-ROM. with the development environment.

The module is installed in an aluminum case and is shipped in versions with two D-Sub connectors.

Part Number: IPEH-002210


For more technical information.


Price:    210.00 / 231.00 Excluding  VAT at 20%

Quantity:  

PCAN-Router Phoenix screw connectors
As IPEH-002210 above but with Phoenix screw connectors

Part Number: IPEH-002210-P



Price:    210.00 / 231.00 Excluding  VAT at 20%

Quantity:  

PCAN-Router Optoisolated with 2 D-Sub
As IPEH-002210 above but with 500v isolation of the ports

Part Number: IPEH-002211



Price:    260.00 / 286.00 Excluding  VAT at 20%

Quantity:  

PCAN-Router DR DIN rail plastic case PCAN-Router DR DIN rail plastic case
As IPEH-002210 above but in a DIN rail plastic case. Bit rate is set by rotary switch on the front
CAN 1 and CAN 2 are isolated to 5KVand the module is suitable for use in an industrial environment.

Part Number: IPEH-002213



Price:    225.00 / 247.50 Excluding  VAT at 20%

Quantity:  

PCAN-Router FD with 2 D-Sub PCAN-Router FD  with 2 D-Sub
The PCAN-Router is a module with two CAN channels, 2.0 or FD whose data traffic is processed by a programmable ARM microcontroller so that incoming CAN messages can be evaluated, converted, and filtered individually in order to transmit appropriately customized CAN messages to the other network. In particular, the module allows the conversion from CAN to CAN FD or vice versa. This makes it easy to accomplish the integration of CAN FD applications into existing CAN 2.0 networks.

You can load your own firmware to the module via CAN using the pre-installed boot loader. The PCAN-Router is shipped with demonstration firmware which performs one-to-one forwarding of the CAN messages between the two CAN channels at 500 kbit/s. The corresponding source code is supplied on the CD-ROM. with the development environment.

The module is installed in an aluminum case and is shipped in versions with two D-Sub connectors,.

Part Number: IPEH-002214



For more technical information.


Price:    260.00 / 286.00 Excluding  VAT at 20%

Quantity:  

PCAN-Router FD with Phoenix screw connectors PCAN-Router FD  with Phoenix screw connectors
The PCAN-Router is a module with two CAN channels, 2.0 or FD whose data traffic is processed by a programmable ARM microcontroller so that incoming CAN messages can be evaluated, converted, and filtered individually in order to transmit appropriately customized CAN messages to the other network. In particular, the module allows the conversion from CAN to CAN FD or vice versa. This makes it easy to accomplish the integration of CAN FD applications into existing CAN 2.0 networks.

You can load your own firmware to the module via CAN using the pre-installed boot loader. The PCAN-Router is shipped with demonstration firmware which performs one-to-one forwarding of the CAN messages between the two CAN channels at 500 kbit/s. The corresponding source code is supplied on the CD-ROM. with the development environment.

The module is installed in an aluminum case and is shipped in versions with a screw-terminal strip.

Part Number: IPEH-002214



For more technical information.


Price:    260.00 / 286.00 Excluding  VAT at 20%

Quantity:  

PCAN-Repeater PCAN-Repeater
The PCAN-Repeater creates a connection between two High-speed CAN busses with galvanic isolation of up to 5 kV. Bus rate is automatically sensed. CAN messages may be forwarded uni-directionally if required, LEDs display the current bus status and each CAN channel can be selectively terminated

With its DIN rail casing and extended temperature range support, this module is suitable for use in an industrial environment.

Part Number: IPEH-004038


For more technical information.


Price:    180.00 / 198.00 Excluding  VAT at 20%

Quantity:  

PCAN-LWL optical link PCAN-LWL optical link
This package enables any CAN section to be implemented with an optical link. Conversion can be to High Speed CAN or Low Speed CAN and termination selected with internal jumpers. The package supplied contains two modules complete with 5 meters of fibre optical cable including connectors. The modules require an external power supply or they can be powered by batteries.

Part Number: IPEH-002026


For more technical information.


Price:    690.00 / 759.00 Excluding  VAT at 20%

Quantity:  

PLIN-LWL optical link PLIN-LWL optical link
For use in explosion-proof areas or for EMC measurements, the PLIN-LWL can be used to replace a stretch of LIN network with a fiber-optic line at any point. The modules are supplied with power externally.

Part Number: IPEH-004049


For more technical information.


Price:    810.00 / 891.00 Excluding  VAT at 20%

Quantity:  

PCAN-Ethernet Gateway DR - CAN to LAN Gateway in DIN rail plastic casing PCAN-Ethernet Gateway DR - CAN to LAN Gateway in DIN rail plastic casing
The PCAN Gateway modules can be used to pass the CAN 2.0 message packets across an Ethernet 10/100 or Wifi IEEE 802.11 b/g network. In addition they can be used with the free Virtual PCAN Gateway package to allow a PC on the Ethernet or Wifi network to interact with the Gateway CAN message stream without having a CAN interface but using Explorer, CAN-View or PCAN-Basics API.

Part Number: IPEH-004010


For more technical information.


Price:    290.00 / 319.00 Excluding  VAT at 20%

Quantity:  

PCAN-Wireless Gateway DR - CAN to WLAN Gateway in DIN rail plastic casing PCAN-Wireless Gateway DR - CAN to WLAN Gateway in DIN rail plastic casing
The PCAN Gateway modules can be used to pass the CAN 2.0 message packets across an Ethernet 10/100 or Wifi IEEE 802.11 b/g network. In addition they can be used with the free Virtual PCAN Gateway package to allow a PC on the Ethernet or Wifi network to interact with the Gateway CAN message stream without having a CAN interface but using Explorer, CAN-View or PCAN-Basics API.

Part Number: IPEH-00004011


For more technical information.


Price:    320.00 / 352.00 Excluding  VAT at 20%

Quantity:  

PCAN-Wireless Gateway - CAN to WLAN Gateway in plastic casing / SUB-D connector PCAN-Wireless Gateway - CAN to WLAN Gateway in plastic casing / SUB-D connector
The PCAN Gateway modules can be used to pass the CAN 2.0 message packets across an Ethernet 10/100 or Wifi IEEE 802.11 b/g network. In addition they can be used with the free Virtual PCAN Gateway package to allow a PC on the Ethernet or Wifi network to interact with the Gateway CAN message stream without having a CAN interface but using Explorer, CAN-View or PCAN-Basics API.

Part Number: IPEH-004020


For more technical information.


Price:    320.00 / 352.00 Excluding  VAT at 20%

Quantity:  

PCAN-Wireless Gateway - CAN to WLAN Gateway in plastic casing / automotive Connector PCAN-Wireless Gateway - CAN to WLAN Gateway in plastic casing / automotive Connector
The PCAN Gateway modules can be used to pass the CAN 2.0 message packets across an Ethernet 10/100 or Wifi IEEE 802.11 b/g network. In addition they can be used with the free Virtual PCAN Gateway package to allow a PC on the Ethernet or Wifi network to interact with the Gateway CAN message stream without having a CAN interface but using Explorer, CAN-View or PCAN-Basics API.

Part Number: IPEH-004020-A


For more technical information.


Price:    320.00 / 352.00 Excluding  VAT at 20%

Quantity:  

CAN & LIN Products > CAN Diagnostics, Routers, Gateways, Repeaters & Opto Link

HomeProductsSupported ChipsInformation ZoneContactSite Map
 
Computer Solutions Ltd
3b Claremont Road, West Byfleet, Surrey KT14 6DY, England
 
Telephone: +44 (0)1932 355630
Email: sales@computer-solutions.co.uk     Web: www.computer-solutions.co.uk
 
Copyright © 2017 Computer Solutions Ltd