COMSOL's Webshop
Computer Solutions Ltd

COMSOL will be closed from 14:00 on the 21st December  until 9:00 2nd January
Last orders for shipping items from stock will be 17:00 on the 20th December

The web shop will remain open with orders being dispatched starting 2nd January

Happy Christmas and a Healthy and Prosperous 2018 to all our customers old and new

Exchange Converter
 Up Catalog Terms & Conds Search View Basket Checkout  Contact Us   

*** WHAT'S NEW *** V3.3.4
---- Shop Contents ---
CAN & LIN Products
Programming Flash memory and Debugging CPUs using BDM/JTAG Tools
C Compilers & Assemblers
USB Protocol Analysers
ROM Emulators
--------------------------------- Suppliers A to Z


Prices quoted are ex-VAT. Euro price is advisory only.
All these items are normally held in stock and orders will be shipped next day.

ColdFire (See bottom of page for ColdFire V1)

Cyclone Universal Cyclone Universal
Use this version of the Cyclone via a Serial, USB or Ethernet interface to program the flash on any of the following ....
Most ARM Cortex 0-4 devices including Kinetis, NXP, Atmel, Cypress, Infineon, Maxim, Silicon Labs, STMicroelectronics, Texas Instruments, and Toshiba.
And the following Freescale families Qorivva MPC55xx/56xx/57xx, MPC5/8xx, ColdFireV1, 1+,2-4, HC(S)12(X,Z), HCS08, HC08, RS08, S32, DSC and MAC7xxx target system.
Software for programming on and off-chip flash for all families is included.
With suitable software it can also be used to debug these CPUs. Or it can be used as a standalone programmer loaded by a PC, taken to production, then operated via the large LCD or a batch program.
Includes all necessary cables for use with the above targets.


For more technical information.


Price:    650.00 / 715.00 Excluding  VAT at 20%

Quantity:  

Cyclone Universal FX Cyclone Universal FX
This is the top of the line release of the Cyclone Universal It provides all the features of the Universal with the following additions....

USB 2.0 link now supports "High-speed" protocol (up to 480Mb/sec to the PC)
1 Gbyte internal memory, no practical limit to # of images held
SDHC Port for even more space
For most modern ColdFires a variant of the communication link to the target is provided that increases the download speed to up to 25Mb/sec
Additional Security and logging features to support Production programming


For more technical information.


Price:    995.00 / 1,094.50 Excluding  VAT at 20%

Quantity:  

Cyclone Max Cyclone Max
Use the Cyclone as a Serial, USB or Ethernet interface between a PC and a KInetis, ColdFire, PPC5xx/8xx, Qorivva (AKA Nexus) 55xx/56xx/57xx or MAC71xx target system. Software for programming on and off-chip flash for these families is included. With suitable software it can also be used to debug any of these CPUs. Or it can be used as a standalone programmer loaded by a PC, taken to production, then operated via the LCD or a batch program.

Note that for a few of the older ColdFire devices including the MCF5272 and MCF5206(E) the Coldfire 26 pin synchronous adapter is also required. See first item in components part of the web page.


For more technical information.


Price:    760.00 / 836.00 Excluding  VAT at 20%

Quantity:  

USB Multilink Universal FX Cable & ColdFire V2-4 Flash Programming Software USB Multilink Universal FX Cable & ColdFire V2-4 Flash Programming Software
Using the USB Multilink Universal FX cable to interface between a PC and a ColdFire V2-4 CPU. The windows software package will program either on chip or external flash memory or on chip EEPROM.
The USB Multilink Universal FX Cable will program ColdFire V2-4 approximately 7 times faster than the USB Multilink Universal.

With other software the Universal FX cable also works with the Arm Cortex M0-M4, Kinetis, HC(R)S08, HC(RS)12(XZ), ColdFire V1-4, Qorivva 55xx/56xx/57xx (NEXUS), DSC, 68HC16 and 683xx.

A single user licence is supplied.


For more technical information.


Price:    510.00 / 561.00 Excluding  VAT at 20%

Quantity:  

USB Multilink Universal Interface Cable & ColdFire V2-4 Flash Programming Software
Using the USB multilink Universal to interface between a PC and a ColdFire V2-4. The windows software package will program either on chip or external flash memory or on chip EEPROM.

The USB Multilink Universal FX+PROGCF is also available which can program most modern ColdFire chips at ~7 times faster than this USB Multilink Universal.

Note that for a few of the older ColdFire devices including the MCF5272 and MCF5206(E) the Coldfire 26 pin synchronous adapter is also required. See first item in components part of the web page.

With other software the Universal cable also works with most ARM Cortex 0-4 devices including Kinetis, NXP, Atmel, Cypress, Infineon, Maxim, Silicon Labs,
STMicroelectronics, Texas Instruments, and Toshiba. as well as HC(R)S08, HC(S)12(XZ), ColdFire V1-4,Qorivva 55xx/56xx/57xx (NEXUS) and DSC.

A single user licence is supplied.


For more technical information.


Price:    340.00 / 374.00 Excluding  VAT at 20%

Quantity:  

MCF5213 ColdFire Development Kit MCF5213 ColdFire Development Kit
Ideal for getting started on ColdFire MCF5213 projects, this development kit consists of a DEV5213CF development board with an integrated USB interface to the BDM built onto the board and a 64K limited ColdFire Pro development package. Software provided consists of the WinIDE development environment with PEmicro's In Circuit Debugger, Flash Programmer, all integrated with the GCC Compiler, library and a host of example programs for operation "out of the box".

A single user licence is supplied.



Price:    85.00 / 93.50 Excluding  VAT at 20%

Quantity:  
See below to purchase the individual components from the packages.

ColdFire 26 pin synchronous adapter
This adapter provides the synchronized debug communications signals required for a few of the older ColdFire devices including the MCF5272 and MCF5206(E). For these chips it is required for use with the Cyclone Universal & FX, MAX, USB Multilink Universal & FX and Tracelink products to synchronize their asynchronous outputs. Please note that you lose trace capabilities on the Tracelink.

This 26-pin synchronous adapter has integrated electronics to synchronize the ColdFire debug communication signals to the PSTCLK signal generated from a ColdFire target.

Note: The previous version of the adapter integrated a ribbon cable. The current version does not integrate the ribbon cable, it should be provided by the user.



For more technical information.


Price:    45.00 / 49.50 Excluding  VAT at 20%


Please advise which software this Cable will be used with (eg Codewarrior, PEmicro)
Quantity:  

USB Multilink Universal Cable FX version USB Multilink Universal Cable  FX version
Use this High Speed Version of the USB Multilink Universal cable to interface between the USB port of a PC and a target processor. For the Kinetis, Qorivva, ColdFire V2-V4, DSC, and 683xx CPU families the FX is 4 to 10 * faster than the USB Multilink Universal Cables.

Note that for a few of the older ColdFire devices including the MCF5272 and MCF5206(E) the Coldfire 26 pin synchronous adapter is also required. See first item in components part of the web page.

With suitable software this cable can be used for debugging or flash programming any of the following - ARM Cortex M0-M4, NXP/Freescale products Kinetis, HC(R)S08, HC(S)12(X), S12Z, 683xx, HC16, ColdFire V1 thru 4, Qorivva 55xx/56xx/57xx (Nexus), and DSC microcontrollers.

These cables are normally used with licensable P&E software and each cable in use requires a separate software license. Software may not be reproduced and used with multiple cables.


For more technical information.


Price:    340.00 / 374.00 Excluding  VAT at 20%


Please advise which software this Cable will be used with (eg CodeWarrior, PEmicro)
Quantity:  

USB Multilink Universal Interface Cable USB Multilink Universal Interface Cable
Use this low cost USB Multilink Universal cable to interface between the USB port of a PC and the debug port of a target processor. With suitable software this cable can be used for debugging or flash programming any of the following Arm Cortex M0-M4, NXP/ Freescale Kinetis ARM, HC(R)S08, HC(S)12(X), HC12Z, ColdFire V1-4, Qorivva 55xx/56xx/57xx (AKA Nexus), PX, or DSC microcontrollers .

The USB Multilink Universal FX Cable will program ColdFire V2-4 approximately 7 times faster than the USB Multilink Universal.

Note that for a few of the older ColdFire devices including the MCF5272 and MCF5206(E) the Coldfire 26 pin synchronous adapter is also required. See first item in components part of the web page.

These cables are normally used with licensable P&E software and each cable in use requires a separate software license. Software may not be reproduced and used with multiple cables.


For more technical information.


Price:    170.00 / 187.00 Excluding  VAT at 20%


Please advise which software this Cable will be used with (eg Codewarrior, PEmicro)
Quantity:  

ColdFire BDM parallel Interface Cable ColdFire BDM parallel Interface Cable
Use the BDM cable to interface between the parallel port of a PC (not a USB printer adapter) and a ColdFire target processor. With suitable software this cable can be used for debugging or flash programming.

These cables are normally used with licensable PEmicro software and each cable in use requires a separate software license. Software may not be reproduced and used with multiple cables.

The 3V version is now obsolete the 10 of the 5V version are available (@5/16) delivery 5-10 days
The USB Multilink Universal is recomended for new projects


For more technical information.


Price:    170.00 / 187.00 Excluding  VAT at 20%


Please advise which software this Cable will be used with (eg Codewarrior, PEmicro)
Quantity:  

14-Pin Berg to 38-Pin Mictor adaptor




Price:    40.00 / 44.00 Excluding  VAT at 20%

Quantity:  

ColdFire V2-4 Flash Programming Software
Use a PEmicro cable (not included) to interface between a PC and a ColdFire V2-4 target processor, this windows software package will program either on chip or external flash memory or on chip EEPROM.

A single user licence is supplied and delivery is via the internet.

Will work with USB Multilink Universal or FX cables (not included).


For more technical information.


Price:    170.00 / 187.00 Excluding  VAT at 20%

Quantity:  

ColdFire V2-4 In-Circuit Debugger
In-circuit debugger for ColdFire devices. This Windows debugger supports reading/writing registers, memory and variables, loading code, and controlling processor execution with links to both assembly language and C.

A single user licence is supplied and delivery is via the internet.

Will work with Cyclone Universal & FX, cyclone Max, USB Multilink Universal & FX cables (not included).


For more technical information.


Price:    340.00 / 374.00 Excluding  VAT at 20%

Quantity:  

ColdFire V2-4 Assembler Software Development Package
Consists of WinIDE, In Circuit Debugger software, Prog and ColdFire Assembler for 5xxx variants.

A single user licence is supplied and delivery is via the internet.

Will work with Cyclone Universal & FX, cyclone Max, USB Multilink Universal & FX cables (not included).


For more technical information.


Price:    550.00 / 605.00 Excluding  VAT at 20%

Quantity:  

ColdFire V2-4 Pro Software Development Package
Consists of WinIDE, In Circuit Debugger software, Prog and ColdFire EABI GCC C-Compiler for 5xxx variants. This is a version of the GNU/GCC ColdFire compiler toolset compiled by PEmicro to operate directly under the Windows environment without requiring installation of a Unix shell. The compiler is integrated into WinIDE and allows for one-touch compilation of a C-level project. The package includes startup code and linker scripts for the MCF527x/528x devices.

A single user licence is supplied and delivery is via the internet.

Will work with Cyclone Universal & FX, cyclone Max, USB Multilink Universal & FX cables (not included).


For more technical information.


Price:    760.00 / 836.00 Excluding  VAT at 20%

Quantity:  

ColdFire V1-4 Library Interface Routine 5 Licences
A set of C library calls that provide an API for using the PEmicro USB Multilink Universal & FX cables (not included). Ideal for those who need to write their own PC based test or diagnostics programs.
Windows and Linux x86 versions are available.

Delivery is via the internet.


For more technical information.


Price:    260.00 / 286.00 Excluding  VAT at 20%

Quantity:  

OS


ColdFire V1-4 Library Interface Routine Unlimited Licences
A set of C library calls that provide an API for using the PEmicro USB Multilink Universal & FX cables (not included) Ideal for those who need to write their own PC based test or diagnostics programs.
Windows and Linux x86 versions are available.

Delivery is via the internet.


For more technical information.


Price:    590.00 / 649.00 Excluding  VAT at 20%

Quantity:  

OS


HomeProductsSupported ChipsInformation ZoneContactSite Map
 
Computer Solutions Ltd
3b Claremont Road, West Byfleet, Surrey KT14 6DY, England
 
Telephone: +44 (0)1932 355630
Email: sales@computer-solutions.co.uk     Web: www.computer-solutions.co.uk
 
Copyright © 2017 Computer Solutions Ltd