Low cost CANUSB interface CANUSB is a very small dongle that plugs into any PC USB Port and gives an instant CAN connectivity. Compliant with CAN 2.0A (11bit ID's) and CAN 2.0B (29bit ID's) it Handles up to 1Mbit/s CAN bit rate and has a Philips 82C251 CAN Transceiver.Low level Ascii Commands operate via USB COM: class driver with DLL or ActiveX interfaces available.
Abatron BDI3000 - This new model in the Abatron BDI family will download your code in less than a quarter of the time taken by the already speedy BDI2000 which it is replacing. It achieves this by having a 10/100 Ethernet link to the PC and a 32MHz link to the target as well as a state of the art internal processer. Together these give it a code download speed of 1.5MBytes/sec (CPU dependent)
Super-Fast mode USB 3.0 Analyser and Signal Generator Designed for USB 3.0 it is based on a new hardware platform with the processing power required to test USB 3.0’s new 5 Gbps Super-Speed mode. The Explorer 280 can act as Analyser or signal Generator supplementing protocol analysis by emulating USB devices and hosts, and by testing error situations and recovery mechanisms. Reproducible traffic, timing and error scenarios can be created with a powerful scripting environment. Captured traffic can be replayed to test a particular situation.
Hi-Tech's NEW PIC 18 Pro C Compiler Computer Solutions Ltd are pleased to introduce the first compiler to include HI-TECH's Omniscient Code Generation compiler technology. OCG is a whole-program compilation technology for superior code density and performance. By taking into account the variables, functions, stacks and registers represented in all program modules together it has been shown to provide memory savings of up to 50% compared to other compilers from major manufacturers which will normally result in significant performance improvements. At the same time it reduces the CPU architecture specific decisions that the programmer needs to make improving portability.
This C runs under HI-TECHs Eclipse based HI-TIDE-3 IDE and includes a full instruction level simulator or it will integrate into the MPLAB environment.
CAN Router/Extender - a module with two CAN channels, whose data traffic is processed by a programmable ARM microcontroller so that incoming CAN messages can be evaluated, converted, and filtered individually in order to transmit appropriately customized CAN messages to the other network.
CAN PC/104-Plus Interfaces - a high-performance solution for connecting CAN networks to a PC/104-Plus system. It is possible to use this with up to four cards stacked on top of each other in one system.
CAN FMS Toolkit - simplifies the development of FMS (Fleet Management System) protocol and Bus-FMS in a single software application with an easy-to-use graphical user interface.
iSYSTEM's MPC5517 GCC based PPC development package This development package from iSYSTEM will compile and debug your MPC5517 application straight from the box. It contains an MPC5517 Target system with power supply, GNU GCC compiler, iONE USB/JTAG interface (32KB download limit), winIDE Development Environment, Flash Programmer and a Quickstart Manual.
New Single Board Computers from Embest New to the web shop are Embest's Mini2410-II (S3C2410) , Mini2410-III (S3C2410A). SBC2440-I (S3C2440A) and SBC2440-II (S3C2440A) module boards.
Mini2410-II - includes LAN, Audio, AD, SPI, Uart, USB, I2C, RTC Mini2410-III - includes ADC, PWM, LCD, UART, IIS, SPI, TSP, Watchdog, I2C, USB, SD/MMC Card, Ethernet, I/O SBC2440-I - includes 2 Ethernet ports, a camera interface and an IDE interface SBC2440-II - includes a Camera interface and System bus interface
New IAR Kickstart Development Kit IAR have just released the Kickstart Development Kit for STMicro's STM32. This 'out of the box' Kickstart Development Kit consists of a STM32 development board a 20-state version of visualSTATE (including example projects), the IAR PowerPac for ARM evaluation edition (including board support), IAR Embedded Workbench with a 32KB kickstart version of the IAR C/C++ Compiler (including example projects), IAR J-LINK JTAG debugger with USB connector and Micrium board support.
Keil ARM Development Tools New to our webshop are Keil development tools for ARM7, ARM9, and Cortex-M3 microcontrollers. They are easy to learn and use, yet powerful enough for the most demanding embedded applications.
The RealView MKD-ARM Development kit is perfect for developers who require industry-standard compilation tools with sophisticated debugging support and the DB-ARM Debugger Kit is ideal for developers who require comprehensive dubugging support for existing GNU or RealView/ADS projects.
We have a range of Keil ARM Evaluation Kits each of which come with an evaluation board, a 16K code limited version of the RealView MDK-ARM Evaluation Tools, ULINK2 JTAG Debugger and sample applications.
New ColdFire C Development System for < £100 P&E Microcomputer's new DEV5213CF is an ideal evaluation kit for getting started on ColdFire MCF5213 projects. The evaluation board contains an embedded P&E USB to BDM interface which provides for easy debug and flash programming of the resident ColdFire MCF5213 processor. The MCF5213 device is a 32-bit ColdFire processor which incorporates 256KB of flash, 32KBytes of ram, ADC, QSPI, PWMs, timers, a PLL, I2c, QSPI, and more! The processor runs at a system clock speed of up to 80MHZ with 76MIPS of performance.
